Wall Panel


  1. ToolUse general woodworking tools, electric drill、self drill、countersink、sawing machine….

  2. Cutting processWoodworking cutter speed is about 3600RPM. It needs to use tungsten carbide saw blade which diameter is 10 ~ 12" and sawtooth is 36 ~ 42 teeth, the less tooth of the blade, the easier for the machine to cut-off and discharge residue. When processing, you can spray anti rust oil (WD-40) on the saw blade to avoid crumbs with sticky.

  3. Burrs repairYou can use fine sandpaper, knives or scissors to grind or scrape for cutting off the burrs.

  4. FoundationUsing keel made of 50x25 or 40x40 plastic wood is best. Use 40x40 galvanized steel square tube is another choice. 

  5. Wall board fixed methodPlastic wood foundation use air nail gun, Steel structure base with tapping screw; Screw specifications for #8 (diameter is about 4.2 mm).Don't leave the gap between the panel.【See the picture above】

  6. MaintenanceWipe it with water or wood floor cleaner.

  7. Wall board construction tools as below picture
   Wood screw        Tapping screw       saw blade       saw blade     Electric drill